|
Written by Administrator
|
Things you need:
- container with a lid
- hydroponic pots
- pump which can handle some pressure (doesn't have to be too effective)
- piece of hose and a plug
- spinning sprinkler
At first, decide how many seedlings you want to grow in your aero.
Drill small holes before drilling the big holes to keep the big drill steady.
Drill the big holes.
Some holes drilled for small hydroponic pots.
Measuring the two last holes to be drilled.
All holes drilled!
Drilling the smaller hole for the hose.
Now, drill a small hole for the sprinkler, which will be attached from below the lid.
Check the spot where you should drill the hole to the hose.
First, check that the pump is placed in the container in a way it should be,
just check it won't be in a place where it'll disturb the roots later.
Press the spinning sprinkler into the hose, if it's too hard, you can expand the hole on the lid little bit.
Now, make exit hole for the powercord, I carved a small hole on one of
the holes to make the cord exit from the side of the hydroponic pot.
Done!
Spinning sprinkler in use.
Click HERE to see small video-clip of the sprinkler in action. (quicktime .mov)
Seedlings growing in Fatalii's seedling aero. |
|
Last Updated ( Friday, 28 April 2006 )
|
